Register Login

  • Expertini Resume Scoring: Our Semantic Matching Algorithm evaluates your CV/Résumé before you apply for this job role.
Get Resume Score
United States Jobs Expertini

Engineered Systems Technician 3/4 (Engineered Systems Tec 3/4) Job Opening In Los Alamos – Now Hiring Los Alamos National Laboratory

Engineered Systems Technician 3/4 (Engineered Systems Tec 3/4)

    United States Jobs Expertini Expertini › United States › Jobs › Los Alamos › Engineers › Engineered Systems Technician 3/4 (Engineered Systems Tec 3/4)

Job description

What You Will DoThe 201 MHz High-Power RF (HPRF) team at LANSCE is seeking an Engineered Systems Technician for the High Powered Radio Frequency (HPRF) team.

The AOT division maintains, operates, and upgrades all accelerator systems used at the Los Alamos Neutron Science Center (LANSCE) complex.

These consist of two 750-keV Cockcroft-Walton-based injector systems (H+ and H- systems), a 201.25-MHz drift-tube linear accelerator (LINAC) utilizing high-power diacrode tubes, an 805-MHz coupled cavity LINAC utilizing high-power klystrons as the primary power source, a proton storage ring, and roughly a kilometer of beam transport lines that deliver beam to the five independent research programs.

The RFE group is principally responsible for all radio frequency (RF) systems.

The group consists of three teams: (1) Low-Level RF (LLRF) focused on real-time phase and amplitude controls; (2) High-Power RF (HPRF) systems at 201 MHz; and (3) High-Power RF systems at 805 MHz. As a member of the AOT-RFE High Power Engineering team you will support operation, maintenance and upgrades of high-power Radio Frequency amplifier systems around the accelerator as well as collaborate in the design of new equipment for future upgrades.

The successful candidate is also expected to provide on call support for the LANSCE high power RF amplifier systems after hours and on weekends.

The on-call assignment will typically be for one week out of every four-six, while the accelerator is operating (approximately 7 months per year).

This position will be filled at the EST 3 or EST 4 level, depending on the skills of the selected candidate.

Additional job responsibilities (outlined below) will be assigned if the candidate is hired at the higher level.

What You NeedMinimum Job Requirements:Engineered Systems Tec 3 ($64,700 - $101,400) The successful candidate must have experience in:
  • The use of electronic test equipment such as oscilloscopes and multimeters.
  • Reading and understanding basic electrical wiring diagrams or schematics, work from documentation, diagrams, rough sketches, layouts, and verbal instructions.
  • Prototyping an electronic chassis including mechanical changes such as the installation of panel mount connectors, terminal boards and PCBs inside metal containment and wiring of connections between the different components.
  • Performing installation, maintenance, commissioning and troubleshooting on electrical and/or electronic equipment and/or systems.
  • Working individually and as part of a team.
  • Producing clear written documents and communications.
  • Using AutoCAD or a similar CAD program to open and view schematics or drawings.
    • Engineered Systems Tec 4 ($71,200 - $112,900) The successful candidate must have experience in:
  • Using AutoCAD, Visio or a similar CAD program to produce and alter schematics or drawings.
  • Producing simple mechanical drawings for supports and chassis to be manufactured by an external manufacturer.
  • Producing electronic and/or electrical drawings from paper drawn schematics or descriptions with a design software (AutoCAD, Visio, Altium, Eagle, etc.).
  • Programming PLC (Shneider Electric, Allen Bradley, etc.) and/or FPGA (NI Labview, Altera, etc.) control systems.
  • Hazard analysis and safety documentation.
  • Leading troubleshooting and maintenance efforts.
    • Education/Experience Engineered Systems Tec3: Position require an Associates' Degree in a related field and a minimum of 3 years of related experience, or an equivalent combination of education and experience directly related to the occupation.

    Education/Experience Engineered Systems Tec 4: Position require an Associates' Degree in a related field and a minimum of 5 years of related experience, or an equivalent combination of education and experience directly related to the occupation.

    At this level, additional training and/or certification may be expected.Desired Qualifications: The preferred candidate would have experience in:
  • Forklift and crane operations.
  • Soldering with fine-pitch, surface mount components.
  • Using RF test equipment such as network analyzer, spectrum analyzer and RF power meters.
  • High-voltage and high power equipment such as transformers, capacitor banks, rectifiers, hi-potters power supplies, crowbar and their protection systems.
  • Pulsed power systems such as modulators and fast switching high voltage systems.
  • RF systems using solid-state or tube amplifiers in the low MHz to UHF range.
  • Experience with computer-based circuit layout simulation (PSpice, Multisim, LTSPice, etc.)
  • Water an air cooling systems such as blowers, pumps, manifolds, water and air sensors and their installation and maintenance.
  • Operations experience at an accelerator facility.
    • Essential Job FunctionsEssential Job Functions (can perform with or without reasonable accommodation): Ability to speak, Ability to discriminate speech, Ability to hear in a normal range (20 Hz to about 20 KHz), Sitting, Standing, Walking, Climbing Ladders, Bending, Stooping, Crouching, Kneeling, Twisting the trunk or back, Lifting 30+ pounds, Carrying 30+ pounds, Use of both hands, Use of both arms, Reaching overhead, Reaching horizontally, Reaching down, Applying torque with hands or arms.

    Work Environment:Work Location: The work location for this position is onsite and located in Los Alamos, NM.

    All work locations are at the discretion of management.Position commitment: Regular appointment employees are required to serve a period of continuous service in their current position in order to be eligible to apply for posted jobs throughout the Laboratory.

    If an employee has not served the time required, they may only apply for Laboratory jobs with the documented approval of their Division Leader.

    The position commitment for this position is 1 year.

    Required Skill Profession

    Engineers


    • Job Details

    Related Jobs

    Los Alamos National Laboratory hiring Engineered Systems Tec 4 Job in Los Alamos, New Mexico, United States
    Los Alamos National Laboratory
    Los Alamos, New Mexico, United States
    Los Alamos National Laboratory hiring Engineered Systems Tec 3 Job in Los Alamos, New Mexico, United States
    Los Alamos National Laboratory
    Los Alamos, New Mexico, United States
    Los Alamos National Laboratory hiring Isotope Production Facility Operator (Engineered Systems Tec 3/4) Job in Los Alamos, New Mexico, United States
    Los Alamos National Laboratory
    Los Alamos, New Mexico, United States
    Los Alamos National Laboratory hiring Pulsed Power Engineered Systems Tec 2/3 Job in Los Alamos, New Mexico, United States
    Los Alamos National Laboratory
    Los Alamos, New Mexico, United States
    Los Alamos National Laboratory hiring Engineered Systems Tec 4/5 - 805 MHz HPRF Team Job in Los Alamos, New Mexico, United States
    Los Alamos National Laboratory
    Los Alamos, New Mexico, United States
    Los Alamos National Laboratory hiring Engineered Systems Tec 2 - 805 MHz HPRF Team Job in Los Alamos, New Mexico, United States
    Los Alamos National Laboratory
    Los Alamos, New Mexico, United States
    Cintas hiring Fire Service Technician - Engineered Systems Job in North Royalton, OH, United States
    Cintas
    North Royalton, OH, United States
    Cintas hiring Fire Service Technician - Engineered Systems Job in North Royalton, OH, United States
    Cintas
    North Royalton, OH, United States
    Wabtec hiring Americas Engineered Systems Commodity Leader Job in Erie, Pennsylvania, United States
    Wabtec
    Erie, Pennsylvania, United States
    Wabtec Corporation hiring Americas Engineered Systems Commodity Leader Job in Fort Worth, TX, United States
    Wabtec Corporation
    Fort Worth, TX, United States
    Wabtec Corporation hiring Americas Engineered Systems Commodity Leader Job in Grove City, PA, United States
    Wabtec Corporation
    Grove City, PA, United States
    Wabtec Corporation hiring Americas Engineered Systems Commodity Leader Job in Pittsburgh, PA, United States
    Wabtec Corporation
    Pittsburgh, PA, United States
    Wabtec Corporation hiring Americas Engineered Systems Commodity Leader Job in Erie, PA, United States
    Wabtec Corporation
    Erie, PA, United States
    Parsons Corporation hiring SVP Infrastructure Solutions - Engineered Systems Job in Centreville, VA, United States
    Parsons Corporation
    Centreville, VA, United States
    Northrop Grumman hiring Mechanical Technician 3/4 Job in Redondo Beach, CA, United States
    Northrop Grumman
    Redondo Beach, CA, United States
    Northrop Grumman hiring Manufacturing Technician 3/4 Job in Salt Lake City, UT, United States
    Northrop Grumman
    Salt Lake City, UT, United States
    Northrop Grumman hiring Manufacturing Technician 3/4 Job in Salt Lake City, UT, United States
    Northrop Grumman
    Salt Lake City, UT, United States
    Northrop Grumman hiring Mechanical Technician 3/4 Job in Redondo Beach, CA, United States
    Northrop Grumman
    Redondo Beach, CA, United States
    Johnson Controls hiring Product Sales Director Engineered Systems EMEA Job in Manchester, New Hampshire, United States
    Johnson Controls
    Manchester, New Hampshire, United States

    Unlock Your Engineered Systems Potential: Insight & Career Growth Guide


    Real-time Engineered Systems Jobs Trends (Graphical Representation)

    Explore profound insights with Expertini's real-time, in-depth analysis, showcased through the graph here. Uncover the dynamic job market trends for Engineered Systems in Los Alamos, United States, highlighting market share and opportunities for professionals in Engineered Systems roles.

    49846 Jobs in United States
    49846
    407 Jobs in Los Alamos
    407
    Download Engineered Systems Jobs Trends in Los Alamos and United States

    Are You Looking for Engineered Systems Technician 3/4 (Engineered Systems Tec 3/4) Job?

    Great news! is currently hiring and seeking a Engineered Systems Technician 3/4 (Engineered Systems Tec 3/4) to join their team. Feel free to download the job details.

    Wait no longer! Are you also interested in exploring similar jobs? Search now: .

    The Work Culture

    An organization's rules and standards set how people should be treated in the office and how different situations should be handled. The work culture at Los Alamos National Laboratory adheres to the cultural norms as outlined by Expertini.

    The fundamental ethical values are:

    1. Independence

    2. Loyalty

    3. Impartiapty

    4. Integrity

    5. Accountabipty

    6. Respect for human rights

    7. Obeying United States laws and regulations

    What Is the Average Salary Range for Engineered Systems Technician 3/4 (Engineered Systems Tec 3/4) Positions?

    The average salary range for a varies, but the pay scale is rated "Standard" in Los Alamos. Salary levels may vary depending on your industry, experience, and skills. It's essential to research and negotiate effectively. We advise reading the full job specification before proceeding with the application to understand the salary package.

    What Are the Key Qualifications for Engineered Systems Technician 3/4 (Engineered Systems Tec 3/4)?

    Key qualifications for Engineered Systems Technician 3/4 (Engineered Systems Tec 3/4) typically include Engineers and a list of qualifications and expertise as mentioned in the job specification. The generic skills are mostly outlined by the . Be sure to check the specific job listing for detailed requirements and qualifications.

    How Can I Improve My Chances of Getting Hired for Engineered Systems Technician 3/4 (Engineered Systems Tec 3/4)?

    To improve your chances of getting hired for Engineered Systems Technician 3/4 (Engineered Systems Tec 3/4), consider enhancing your skills. Check your CV/Résumé Score with our free Tool. We have an in-built Resume Scoring tool that gives you the matching score for each job based on your CV/Résumé once it is uploaded. This can help you align your CV/Résumé according to the job requirements and enhance your skills if needed.

    Interview Tips for Engineered Systems Technician 3/4 (Engineered Systems Tec 3/4) Job Success

    Los Alamos National Laboratory interview tips for Engineered Systems Technician 3/4 (Engineered Systems Tec 3/4)

    Here are some tips to help you prepare for and ace your Engineered Systems Technician 3/4 (Engineered Systems Tec 3/4) job interview:

    Before the Interview:

    Research: Learn about the Los Alamos National Laboratory's mission, values, products, and the specific job requirements and get further information about

    Other Openings

    Practice: Prepare answers to common interview questions and rehearse using the STAR method (Situation, Task, Action, Result) to showcase your skills and experiences.

    Dress Professionally: Choose attire appropriate for the company culture.

    Prepare Questions: Show your interest by having thoughtful questions for the interviewer.

    Plan Your Commute: Allow ample time to arrive on time and avoid feeling rushed.

    During the Interview:

    Be Punctual: Arrive on time to demonstrate professionalism and respect.

    Make a Great First Impression: Greet the interviewer with a handshake, smile, and eye contact.

    Confidence and Enthusiasm: Project a positive attitude and show your genuine interest in the opportunity.

    Answer Thoughtfully: Listen carefully, take a moment to formulate clear and concise responses. Highlight relevant skills and experiences using the STAR method.

    Ask Prepared Questions: Demonstrate curiosity and engagement with the role and company.

    Follow Up: Send a thank-you email to the interviewer within 24 hours.

    Additional Tips:

    Be Yourself: Let your personality shine through while maintaining professionalism.

    Be Honest: Don't exaggerate your skills or experience.

    Be Positive: Focus on your strengths and accomplishments.

    Body Language: Maintain good posture, avoid fidgeting, and make eye contact.

    Turn Off Phone: Avoid distractions during the interview.

    Final Thought:

    To prepare for your Engineered Systems Technician 3/4 (Engineered Systems Tec 3/4) interview at Los Alamos National Laboratory, research the company, understand the job requirements, and practice common interview questions.

    Highlight your leadership skills, achievements, and strategic thinking abilities. Be prepared to discuss your experience with HR, including your approach to meeting targets as a team player. Additionally, review the Los Alamos National Laboratory's products or services and be prepared to discuss how you can contribute to their success.

    By following these tips, you can increase your chances of making a positive impression and landing the job!

    How to Set Up Job Alerts for Engineered Systems Technician 3/4 (Engineered Systems Tec 3/4) Positions

    Setting up job alerts for Engineered Systems Technician 3/4 (Engineered Systems Tec 3/4) is easy with United States Jobs Expertini. Simply visit our job alerts page here, enter your preferred job title and location, and choose how often you want to receive notifications. You'll get the latest job openings sent directly to your email for FREE!