INTERDISCIPLINARY ENGINEER

Job description

Summary You will serve as Principal Technical Manager for the Airframe technologies and associated technologies in materials and structures in the Air Systems Group, Technical Director Office of NAVAIRWARCENAC DIV.

The Secretary of Defense has ordered a department-wide hiring freeze subject to certain limited exceptions.

This position is subject to the DoD hiring freeze.

Offers of employment related to this vacancy announcement will not be executed until the position has an approved exemption.

Responsibilities You will be the Navy technical expert, advisor, and national leader for Airframe technologies and associated technologies in materials and structures.

You will develop processes and innovative approaches with focus on integrating technologies into new and existing designs in the broad areas of Airframe technologies, DoD acquisition process, and airworthiness processes and standards.

You will provide senior technical consultation to program managers, PEOs, DARPA, NAVAIR/NAWC leadership, and academia, industry, and other Government organizations to support programs-of-record, in-service systems, and ongoing and emergent research.

You will serve as a leading technical expert in development, experimentation and evaluation of next-generation aircraft within NAWCAD and across DoN, DoD, and industry.

You will develop risk management alternatives and mitigation strategies and plans to ensure balance between technical requirements, and system maturity.

You will provide leadership for extremely complicated technical efforts for unproven technology insertion and engineering development programs.

You will influence the development, management, and implementation of new or revised techniques for applied development and evaluation by conducting uncharted and independent research, as well as stimulating and leading a full spectrum of SnT.

Requirements Conditions of Employment Qualifications Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.

Candidates will not be hired based on their race, sex, color, religion, or national origin.

To meet the minimum qualification requirements for this position, your resume must show that you possess the Technical Qualifications (TQ) related to this position - NOT TO EXCEED 2 PAGES.

Resumes over the 2-page limit, will not be reviewed beyond page 2 or may be disqualified.

Your resume should include examples of experience, education, and accomplishments applicable to the qualification(s).

If your resume does not reflect demonstrated evidence of these qualifications, you may not receive consideration for the position.

There is NO requirement to prepare a narrative statement specifically addressing the Technical Qualifications (TQs).

#1.

Subject Matter Expert (SME) in Airframe technologies and associated technologies in materials and structures.

#2.

Navy national leader that provides overall technical direction and leadership for developing processes and innovative approaches with focus on integrating technologies into new and existing designs in the broad areas of Airframe technologies, DoD acquisition process, and airworthiness processes and standards to conduct technical reviews and assess soundness of technical objectives Additional qualification information can be found from the following Office of Personnel Management website: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=GS-PROF AND All Professional Engineering series, 08XX Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social).

Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Education Applicants must meet the following positive education qualifications requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: For Professional Engineering Series: A.

Degree: Engineering.

Successful completion of a bachelor's or higher engineering degree from an accredited college or university.

To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.

-or- B.

Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering.

The adequacy of such background must be demonstrated by one of the following: (I) Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico.

Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration.

For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions; or (II) Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico; or (III) Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A.

The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A; or (IV) Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance.

Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

(The above examples of related curricula are not all inclusive.) An advanced degree of Master's or Ph.D. in one of the educational fields listed above is highly desirable.

Additional Information Senior Scientific Technical Manager (SSTM) positions are positions which exceed the DP-05 (GS-15 equivalent).

SSTMs provide a continuity of technical leadership and oversight that is needed to ensure long term stewardship of an organization's technical capabilities.

Typically, applicants for SSTM positions are expected to have a graduate degree, significant research or development experience, and a national or international reputation in his/her field and are recognized throughout the applicable community as a renowned expert.

SSTM positions are in the competitive service.

This position is not covered by the Department of Defense Priority Placement Program.

Additional vacancies may be filled by this announcement.

A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.

Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants.

Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf.

There are three key documents that contain important information about your rights and obligations.

Please read and retain these documents: Noncriminal Justice Applicant's Privacy Rights, for those who undergo an FBI fingerprint-based criminal history record check for personnel vetting, which includes Rap Back, FD-258 Privacy Act Statement - FBI (this is the same statement used when your fingerprints are submitted as part of your background investigation), and SEAD-3-Reporting-U.pdf (dni.gov), (applicable to those who hold a sensitive position or have eligibility for access to classified information) Equal Employment Opportunity (EEO) Policy Statement: http://www.eeoc.gov/federal/index.cfmEmployment Information Resources - Resource Center: https://help.usajobs.gov/how-toMales born after 12-31-1959 must be registered or exempt from Selective Service (see https://www.sss.gov/RegVer/wfRegistration.aspx)

Required Skill Profession

Other General