SURFACE MAINTENANCE REPAIRER

Job description

Summary This position is for a SURFACE MAINTENANCE REPAIRER, PD#D1193000, part of the Nevada Army National Guard.

This position is located in the Joint Forces Headquarters-State, Logistics Directorate (G4), Surface Maintenance Facility.

The purpose of this position is to perform limited diagnosis, routine repairs, and maintenance on combat, tactical, commercial, and special purpose vehicles and equipment.

May assist higher graded mechanics in the performance of maintenance duties.

Responsibilities (1) Performs limited diagnosis, routine repairs and maintenance on heavy-duty mobile equipment, combat, tactical and automotive vehicles.

Assists higher graded mechanics in the repair and/or overhaul of major systems to include internal combustion engines, turbine engines, automatic and non-automatic transmissions, heavy duty drive line systems, and hydraulic utility systems and controls.

Makes routine repairs that can be accomplished by removing, adjusting, or replacing defective or worn parts and components.

Performs work in accordance with technical manuals, lubrication orders, maintenance bulletins, regulations or management policies.

(2) Performs limited diagnoses to determine the cause of mechanical failures by means of visual and auditory checks and/or uses basic test equipment such as compression testers, voltmeters, ohmmeters and pressure gauges.

Determines when parts should be cleaned, adjusted or replaced with standard parts to complete work orders.

(3) Removes, replaces, adjusts, cleans and installs parts and components such as wheel seals, switches, sensors, fuel pumps, water pumps, power steering pumps, brakes, filters, radiators, bearings, springs, shock absorbers, wheel cylinders, starter motors, mufflers, battery cables, and other items of similar complexity.

(4) Independently performs routine repairs and maintenance functions in remote locations that can be accomplished by removing, cleaning, reinstalling, or replacing defective parts of components and systems using standard parts.

Receives guidance and instruction from a higher graded mechanic or supervisor to perform non-routine and more complex repairs on portions of major assemblies and/or systems.

May provide field maintenance at unit locations as part of a contact team.

Recovers and evacuates inoperable vehicles from the unit location of breakdown.

(5) Conducts limited readiness and repair inspections on vehicles and associated equipment supported by the activity.

Performs Preventive Maintenance Checks and Services (PMCS) and ensures vehicles and equipment are properly serviced, including brake adjustments, replacing hydraulic fluids, greasing, cleaning, etc.

Performs other preventive maintenance operations as required to ensure that equipment is functioning properly.

(6) May perform routine maintenance and limited repairs on basic communication equipment such as radios, field telephones, amplifiers, switchboards, recorders, intercoms by removing and replacing components and elements.

Performs minor body and fender, or other metal repairs, using peening hammers, dollies and limited welding.

Performs limited repairs and routine maintenance on small arms and accessory equipment by replacing worn or damaged parts.

Makes minor repairs to canvas and leather items using bonding/sealing compounds and hand tools such as awls, canvas needles etc.

(7) In conjunction with or in the absence of the Tools and Parts Attendant, may maintain supply documentation, and the receipt, store, issue, and inventory of tools and parts used in the trades operation.(8) Performs other duties as assigned.

Requirements Conditions of Employment MILITARY REQUIREMENTS: Compatible military grade and assignment required prior to the effective date of placement.

In compliance with Title 32 United States Code, the compatible military skill set is determined by the applicable service manpower requirements.

Upon selection, individuals are assigned to the authorized position and its compatible military skill in accordance with Army skill classification directives, statutes, and National Guard Bureau regulations.

The Dual Status technician must obtain and maintain all military skill requirements in regard to training, education, certifications, experience.

If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.

Compatible Military Assignment: ENLISTED: E1 to E8 Compatible MOS: 12, 13, 88, 91, 92 *Other Requirements & Conditions of Employment: - Must be willing to accept a job offer on or after 05OCT2025.

- National Guard Membership is required.

- Males born after 31 December 1959 must be registered for Selective Service.

- Federal employment suitability as determined by a background investigation.

- Must be able to obtain and maintain the appropriate security clearance of the position.

- May be required to successfully complete a probationary period.

- Must maintain local network access IAW AR 25-2.

- Wear the uniform appropriate for the members' grade and component of the armed forces, maintaining standards of conduct and appearance.

- This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968.

An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position.

- Ability to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission.

- May occasionally be required to work other than normal duty hours; overtime may be required.

- The duties and responsibilities of your job may significantly impact the environment.

You are responsible to maintain awareness of your environmental responsibilities as dictated by legal and regulatory requirements, your organization, and its changing mission.

- For positions requiring the operation of motor vehicles, candidates must have a valid state driver's license.

Qualifications In order to qualify for this position, your resume must provide sufficient experience and/or education, knowledge, skills, and abilities, to perform the duties of the specific position for which you are being considered.

Education requirement is based upon the qualification standards for the specific position and is stated under the heading EDUCATION.

Your resume is the key means we have for evaluating your skills, knowledge, and abilities, as they relate to this position.

Therefore, we encourage you to be clear and specific in describing your experience.

EACH APPLICANT MUST FULLY SUBSTANTIATE (IN THEIR OWN WORDS) THAT THEY MEET THE REQUIREMENTS OF THE SPECIALIZED EXPERIENCE LISTED BELOW; OTHERWISE, THE APPLICANT WILL BE CONSIDERED UNQUALIFIED FOR THIS POSITION.

DO NOT COPY FROM THE VACANCY ANNOUNCEMENT OR THE POSITION DESCRIPTION OR YOU MAY BE DISQUALIFIED.

GENERAL EXPERIENCE: Must have experience or training which demonstrates knowledge of equipment to be able to do routine jobs, simple preventative maintenance tasks, and can use common tools and equipment in the line of work SPECIALIZED EXPERIENCE: Must have experience or training using common hand and power tools and a small variety of test and measurement devices to make mechanical repairs.

Experience removing, adjusting, replacing, cleaning, and installing a variety of parts, components, and accessories.

Experience which demonstrates a basic understanding of mechanical, electrical, and hydraulic theory applying to vehicles; and skill to replace, fit, install, and make adjustments.

Experience demonstrating an understanding of the makeup and operation of the various individual systems maintained and their interrelationships.

Experience reading and interpreting parts lists, manufactures' repair manuals, diagrams, and electrical schematics.

Education There is no specific education requirement for this position.

The applicant's record of experience and/or training must show possession of the knowledge, skills and abilities needed to fully perform the duties of the position.

You must provide transcripts or other documentation to support your Training/Educational claims.

To receive credit for Training/Education, you must provide documentation of proof that you meet the Training/Education requirements for this position.

Additional Information - If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (https://www.sss.gov/RegVer/wfRegistration.aspx).

- This is a Bargaining Unit position.

- Applicants who feel they have restoration rights to this position should contact the HRO.

- Military Incentives - Bonuses and Student Loan Repayment Program: If you are selected for this position, you may lose your eligibility for your National Guard Enlistment/Reenlistment Bonus and/or Student Loan Repayment Program incentives.

In order to avoid losing your incentive eligibility, you should check with your incentives manager prior to accepting an offer for the position.

- Participation in Direct Deposit is mandatory.

AREA OF CONSIDERATION: In accordance with the State Merit Placement Plan, candidates will be considered in order of their area of consideration category as appropriate.

TERM POSITIONS: Temporary-Not to Exceed (TEMP) and Temporary-Indefinite (INDEFINITE) are considered to be TERM positions and are limited in duration to 4 years maximum.

Employees reaching maximum TERM appointment limit of 4 years may be terminated.

CONVERSION OF TERM (TEMPORARY/INDEFINITE) POSITIONS: Positions advertised as TEMP or INDEFINITE may be non-competitively converted to INDEFINITE or PERMANENT without further at a future date contingent upon available funding.

For TEMP PROMOTIONS, position may be non-competitively converted upon expiration of the incumbent's USERRA rights.

RECRUITMENT/RELOCATION INCENTIVE: Recruitment and/or Relocation incentives may be available, if eligible.

Incentives are subject to funding availability and TAG-NV approval and are not guaranteed.

PERMANENT CHANGE OF STATION (PCS): PCS funding is NOT authorized.

If you do not reside in the location of the position, you will be required to relocate at your own expense.

SELECTED RESERVE INCENTIVE PROGRAM: Acceptance of this position will cause termination of Federal bonuses pursuant to respective Selected Reserve Incentive Programs (SRIP).

This termination may be with or without recoupment of payments already made.

Required Skill Profession

Other General